Twisted Anchor Lines – Medallion 3 Anchor Lines
For the Marine IndustryMedallion 3 Anchor Lines are made from our MG3 Nylon. This provides great handling, stretch, shock absorption and abrasion resistance characteristics. Medallion 3 Anchor Lines are available in white, blue and black. These Anchor Lines are spliced to a galvanized thimble.
Applications: Anchor Line
Industries served: Marine
Uses: Wet environments
Color: White
Twisted Anchor Lines – Medallion 3 Anchor Lines Specifications
Standard Sizes
| in. |
| 3/8" |
| 1/2" |
| 5/8" |
Standard Lengths
| 50' – 100′ – 150′ – 200′ |
| 100′ – 150′ – 200′ – 250' – 300' |
| 150′ – 200′ – 250′ – 300' |
Rope Safety Considerations
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.