Compass Anchor Lines are made with double braid nylon rope. Compass nylon rope provides great handling, shock absorption and abrasion resistance. Colored dock lines are made with solution died nylon meaning the ropes will not bleed once they get wet. Double Braid Anchor Lines come standard with a stainless-steel thimble.
Applications: Anchor Line
Industries served: Marine
Uses: Wet environments
|100' – 150′ – 200′|
|100' – 150′ – 200′ – 300'|
|150′ – 200′ – 300'|
|*Custom lengths are always welcome.|
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.