Anchor Ropes With Chains and Thimbles
For the Marine IndustryThese anchor lines are made with Cornerstone 3 or Medallion 8 rope. Both ropes will work with a windlass either with a chain or up to the thimble.
Medallion 8 anchor lines come standard with a stainless-steel thimble or directly spliced to chain. Cornerstone 3 anchor lines come standard with a galvanized thimble or directly spliced to chain. The chain used for anchor lines is a G4 chain.
Applications: Anchor Line
Industries served: Marine
Uses: Wet environments
Color: White
Twisted Anchor Ropes With Chains and Thimbles Specifications
| Product Numbers | Twisted | |
|---|---|---|
| Size | Chain Length | |
| 25-16150 | 1/2" x 150' | 1/4" x 10' |
| 25-16200 | 1/2" x 200' | 1/4" x 15' |
| 25-16300 | 1/2" x 300' | 1/4" x 15' |
| 25-18150 | 9/16" x 150' | 5/16" x 15' |
| 25-18200 | 9/16" x 200' | 5/16" x 20' |
| 25-18300 | 9/16" x 300' | 5/16" x 20' |
| 25-20200 | 5/8" x 200' | 5/16" x 15' |
| 25-20300 | 5/8" x 300' | 5/16" x 20' |
8 Plait Anchor Ropes With Chains and Thimbles Specifications
| Product Numbers | 8 Plait | |
|---|---|---|
| Size | Chain Length | |
| 04-16150 | 1/2" x 150' | 1/4" x 10' |
| 04-16200 | 1/2" x 200' | 1/4" x 15' |
| 04-16300 | 1/2" x 300' | 1/4" x 15' |
| 04-20150 | 5/8" x 150' | 5/16" x 10' |
| 04-20200 | 5/8" x 200' | 5/16" x 15' |
| 04-20300 | 5/8" x 300' | 5/16" x 20' |
Rope Safety Considerations
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.