Nylon/Polyester Blend – Blend

For the Marine Industry

Nylon/Polyester Blend – Blend

Blend is a combination of Nylon and Polyester fiber. This combination has less stretch than 100% Nylon. The use of a blend reduces the cost but maintains the high strength and low stretch characteristics at the best possible price.

  • Working load: 10 – 12%

Applications: Boating, dock lines, anchor lines and general multi-purpose

Industries served: Marine

Uses: Boating and wet applications

Available in White

Nylon/Polyester Blend  – Blend Specifications

Product NumberDiameterCircumferenceAverage Tensile StrengthWeight
in.mm.in.mm.lbs.Kg.lbs/100 ftKg/100 m
23-120063/8"101 1/8"303,7001,6823.55.2
23-140067/16"111 1/4"335,0002,27357.5
23-160061/2"121 1/2"365,8002,6366.59.7
23-240063/4"182 1/4"5413,5006,13614.521.6
23-280067/8"222 3/4"6618,0008,1822029.8

Rope Safety Considerations

New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.

Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.

The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.

Talk to an expert today to find out how we can assist you with your roping needs.