HMPE 12 – Syn-Tuff

For the Marine, Industrial, Government and Utility Industries

HMPE 12 – Syn-Tuff

HMPE 12 – Syn-Tuff is made with ultra-high strength HMPE. HMPE will float, is not affected by water, and has excellent resistance to the following: acids, alkali, most chemicals and UV-Light. HMPE is comparable to steel cable of the same size in tensile strength but is much lighter and easier to handle. HMPE 12 is also non-rotational due to it’s construction and has extremely low stretch.

  • Working load: 20 – 25%
  • Meets CI-1906

Applications: Barge Tie up Line, Chipper Winch Line, Stage Rigging, Tug Lock Line, Vehicle Winch Line, Tug Winch Line

Industries served: Marine, Industrial, Government, Utility and Sports

Uses: ATV winch line, soft shackles, barge facing lines, wire replacement, slings, safety lifeline

Colors: Red, Blue, Orange

HMPE 12 – Syn-Tuff Specifications

Product NumberDiameterCircumferenceAverage Tensile StrengthWeight ftKg/100 m

Rope Safety Considerations

New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.

Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.

The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.

Talk to an expert today to find out how we can assist you with your roping needs.