Industrial Double Braid Nylon
Halyards, Jib Lines, Control Lines.Manufactured from 100% Nylon combining high strength and good shock absorption. Excellent for various applications where a little stretch or give is desired.
Meets MIL-R-24050 and CI-1306
Double Braid Nylon Specifications
| Diam | Circumference | Tensile Strength | Lbs. Per 100' |
|---|---|---|---|
| 1/4" | 3/4" | 2,200 | 1.6 |
| 5/16" | 1" | 3,400 | 2.5 |
| 3/8" | 1-1/8" | 4,900 | 3.6 |
| 7/16" | 1-1/4" | 6,600 | 4.9 |
| 1/2" | 1-1/2" | 8,500 | 6.3 |
| 9/16" | 1-3/4" | 10,800 | 8.0 |
| 5/8" | 2" | 15,200 | 10.0 |
| 3/4" | 2-1/4" | 18,000 | 14.3 |
| 7/8" | 2-3/4" | 23,000 | 20.0 |
| 1" | 3" | 33,500 | 26.0 |
| 1-1/8" | 3-1/2" | 46,000 | 34.0 |
| 1-1/4" | 3-3/4" | 50,000 | 40.0 |
Available Colors
| White |  |
| Gold/White |  |
| Blue |  |
| Red |  |
| Green |  |
| Black |  |
| Gold |  |
| Teal |  |
| Hunter Green |  |
| Navy |  |
Rope Safety Considerations
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition. New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.