Industrial Medallion
Halyards, Jib Lines, Control Lines.An 8-strand plaited rope made with 100% Nylon. This rope has superior shock absorbency and abrasion resistance, as well as excellent strength. Medallion meets MIL-R-24337 and CI-1303.
Uses: anchor lines, mooring lines, safety.
Medallion Specifications
| Diam | Circumference | Tensile Strength | Lbs. Per 100' |
|---|---|---|---|
| 3/8" | 1-1/8" | 3,300 | 3.7 |
| 7/16" | 1-1/4" | 4,800 | 5.2 |
| 1/2" | 1-1/2" | 6,400 | 6.8 |
| 5/8" | 2" | 11,000 | 11.1 |
| 3/4" | 2-1/4" | 17,000 | 15.1 |
| 7/8" | 2-3/4" | 24,000 | 21.0 |
| 1" | 3" | 31,000 | 27.7 |
| 1-1/8" | 3-1/2" | 38,000 | 36.2 |
| 1-1/4" | 3-3/4" | 46,000 | 42.0 |
| 1-1/2" | 4-1/2" | 63,000 | 58.3 |
| 1-5/8" | 5" | 73,000 | 70.0 |
| 1-3/4" | 5-1/2" | 78,000 | 87.5 |
| 2" | 6" | 95,000 | 100.0 |
Loop spliced in 50 seconds!
Rope Safety Considerations
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property are involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.