Government Woods Hole Lay Rope

Halyards, Jib Lines, Control Lines.

Woods Hole Lay Rope

Woods Hole Lay Rope is an 8-strand rope made with 100% Nylon with Performance Plus overlay finish for increased wear resistance. This rope is engineered and constructed specifically for the toughest deep-sea tethering. The special high-strength construction combined with premium Nylon assures top quality.

Woods Hole Lay Rope Specifications

DiameterCircumferenceTensile Strength LbsLbs. Per 100'
11/16"2-1/1615,00012.2
3/4"2-1/4"16,20013.6
7/8"2-5/8"22,00019.1
1"3"27,00023.7

Rope Safety Considerations

New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.

Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property are involved, or for exceptional service conditions such as shock loads, sustained loads, etc.

The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.

Talk to an expert today to find out how we can assist you with your roping needs.