Government Double Braid Technora Tech 1
Halyards, Jib Lines, Control Lines.Double Braid Technora rigging line offers extremely high strength with virtually no stretch under normal working loads. Due to the strength to weight ratio of Technora it is possible to reduce weight making Technora an excellent choice for all lifting and pulling applications.
Uses: Winch lines, Static lines, and any pulling operation.
Tech I has four tracers for identification, solid colors have white ID tracers. Tech I is made with a 100%
Technora braided core with an abrasive resistant Polyester braided cover.
Custom slicing available, we can splice your supplied hardware to the size and length you require.
Tech 1 Sizes
| Sizes Available |
|---|
| 3/16" |
| 1/4" |
| 3/8" |
| 7/16" |
| 1/2" |
| 9/16" |
| 3/4" |
Tech 1 Lengths
| Lengths |
|---|
| Standard 600’ reels or bulk boxes |
Available Colors
| Black | |
| Blue | |
| Red | |
| Green | |
| Blue Tracer |  |
| Red Tracer | |
| Green Tracer | |
| Black Tracer |  |
Tech 1 Specifications
| Diameter | Circumference | Tensile Strength Lbs | Lbs. Per 100' |
|---|---|---|---|
| 1/4" | 3/4" | 4,600 | 2.0 |
| 5/16" | 1" | 7,400 | 3.1 |
| 3/8" | 1-1/8" | 10,400 | 4.5 |
| 7/16" | 1-1/4" | 14,400 | 6.2 |
| 1/2" | 1-1/2" | 20,500 | 8.0 |
| 5/8" | 2" | 36,000 | 13.5 |
| 3/4" | 2-1/4" | 45,000 | 18.5 |
| 3/16" | 9/16" | 2,000 | 1.2 |
Rope Safety Considerations
New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.
Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property is involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.