Arborist Power Bull Rope

Designed for Pulling.

Power Pull Bull Rope

Bull Rope Specifications

DiameterCircumferenceTensile Strength LbsLbs. Per 100'
1/2"1-1/2"9,8008.0
9/16"1-3/4"13,00010.1
5/8"2"16,60013.0
3/4"2-1/4"18,50018.0

Power Pull is double braid rope manufactured from 100% Polyester and impregnated with Buccaneer Power Coating for abrasion resistance and to repel dirt and grime (enemies of fiber rope). Designed for Pulling, this balanced rope remains flexible, round and will not rotate under load. The Double Braid construction permits easy splicing for eyes, thimble eyes or loops.

Normally used by Arborist for tree work, Power Pull is great as winch lines, utility stringing lines and conduit pulling rope.

Buccaneer coating is also key to the size and strength of Power Pull Bull Rope

Available Colors

1/2" Yellow Coating
9/16" Blue Coating
5/8" Orange Coating
3/4" Green Coating

Now you have a bull rope for any and all applications.

Rope Safety Considerations

New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.

Working loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property are involved, or for exceptional service conditions such as shock loads, sustained loads, etc.

The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.

Talk to an expert today to find out how we can assist you with your roping needs.