Industrial Champion

Halyards, Jib Lines, Control Lines.

Champion

An 8-strand plaited rope made with 100% Polyester, combining qualities ideal for high strength and low stretch applications. This rope is highly resistant to common acids and alkalizes, as well as resistant to sunlight exposure. Champion meets MIL-R-24730 and CI-1304.

Champion Specifications

Product NumberDiameterCircumferenceAverage Tensile StrengthWeight
in.mm.in.mm.lbs.Kg.lbs/100 ftKg/100 m
5-123/8101-1/8304,5002,0454.56.7
5-161/2121-1/2367,7003,5008.412.5
5-205/81624812,1005,50013.620.3
5-243/4182-1/45415,2006,90918.327.3
5-287/8222-3/46621,8009,90921.632.2
5-3212437226,70012,13631.947.6
5-361-1/8283-1/28435,90016,3184262.6
5-401-1/4303-1/49040,20018,27348.672.5
5-441-1/2364-1/210856,90025,86470.3104.9
5-461-3/4445-1/413282,00037,273102.8153.3
5-48248614497,00044,091123183.5

Loop spliced in 50 seconds!

Rope Safety Considerations

New Rope Tensile Strengths: New rope tensile strengths are based on tests in accordance with ASTM Test Method D-4268 on new and unused rope in laboratory condition.

Working Loads: Working loads are for rope in good condition with approximate splices, in non-critical applications, under normal service conditions. Working loads should be exceeded only with expert knowledge of conditions and professional estimates of risk. Working loads should be reduced where life, limb, or valuable property are involved, or for exceptional service conditions such as shock loads, sustained loads, etc.

The Cordage Institute specifies that the Safe Working Load of rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.

Talk to an expert today to find out how we can assist you with your roping needs.